Yamaha DJX Owner's Manual - Page 66
Ribbon Controller, Using The Ribbon Controller, Turntbl
View all Yamaha DJX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
RIBBON CONTROLLER The RIBBON CONTROLLER is a wonderfully expressive and easy-to-use performance controller. Once a sought-after feature found on vintage analog synthesizers, it is rarely included on modern instruments - until now, with the new DJX! The RIBBON CONTROLLER can be assigned to any one of fifteen different parameters. These include all the same parameters as can be used with the ASSIGN knob, plus the same parameters controlled by the CUTOFF, RESONANCE, and GROOVE knobs. UUSSIINNGG TTHHEE RRIIBBBBOONN CCOONNTTRROOLLLLEERR 1 Select RIBBON CONTROLLER ASSIGN in the Overall menu. (Press one of the OVERALL v/w buttons, repeatedly if necessary.) 2 Select the Ribbon Controller Assign parameter. (Use the OVERALL +/- buttons.) 3 Select a Part (with the PART SELECT keys) and start the pattern (with the START/ STOP button). 4 Use the RIBBON CONTROLLER to change the sound. 1 Select RIBBON CONTROLLER ASSIGN in the Overall menu. Press one of the OVERALL v/w buttons, repeatedly if necessary, until RIBBON CONTROLLER ASSIGN is selected. (The dark bar at the left of the display should be directly next to "RIBBON CONTROLLER ASSIGN" on the panel.) 001 142 MEASURE Indicates Ribbon Controller Assign is selected. 2 Select the RIBBON CONTROLLER parameter. Use the OVERALL +/- buttons to select the parameter to be controlled by the RIBBON CONTROLLER. DEMO START 14Turntbl VOICE STYLE 66 • The default setting for the RIBBON CONTROLLER is #14 Turntable. • Selecting a Part is not necessary and has no effect for the following parameters: • Dynamics • Dynamics Strength • Turntable • Arpeggiator Speed These parameters are already set to affect a certain Part or Parts.