Yamaha DJX Owner's Manual - Page 83

SONG RECORDING Recording to the Chord Track A special Chord track is provided for recording pattern data. This is automatically recorded to the Chord track (track 6). To select the Chord track and turn on the Pattern Control, press the PATTERN CONTROL button. If Pattern Control has already been turned on before entering the Record mode, the Chord track is automatically selected. 001 142 MEASURE 1 CHORD You can also simultaneously record one of the melody tracks (1 - 5) and the Chord track (6). 5 Start recording. When the "RECORD" indication stops flashing and the beat bars and track number start flashing, you can start recording simply by playing the keyboard (or by pressing the START/STOP button). 004User11 SONG RECORD Indicates Record standby. Flashing beat bars indicate Sync-Start is on. This function can also be controlled by using a connected footswitch. (See page 21.) If you want to rehearse your part before recording, press the SYNC-START button to turn Sync-Start off. After rehearsing, press SYNC-START again to return to the above condition. When recording the Chord track With Sync-Start on, play the first chord of the song in the Pattern section of the keyboard. The pattern starts automatically and you can continue recording, playing other chords in time with the pattern. Pattern Section Performance Section If you wish to cancel recording at this point, press the RECORD button again. 6 Stop recording. After you've finished playing the part, press the START/STOP button. 83