Yamaha DKC-850 Additional Functions - Page 13

■ Setting the MAC Address If you find it too inconvenient to have to enter a passcode each time you access the Disklavier from an external remote controller, you can set the MAC address of the external remote controller. This will allow the external remote controller with the registered MAC address to access your Disklavier without entering the passcode. 1 With the passcode properly set, press [ ] to select "MAdr1." =Passcode= ?=]-+ >Passcode=1234 >MAdr1 Other Settings 2 Enter the address with [+/YES], [-/NO], and the cursor buttons ([ ] [ ]). Enter an address with [+/YES] and [-/NO], and move the cursor with the cursor buttons ([ ] [ ]). Note: You can also use the dial on the control unit to enter the address. =Passcode= _?=]-+ + >Passcode=1234 >MAdr1=01:AB:23:C#:##:## You can set up to three addresses. To set the second and third address, press [ parameter. ] and select the 3 Press [ENTER] to complete the operation. English 13