Yamaha DVD-S550 Owner's Manual - Page 24
Setting the Digital output, CD Upsampling, DIGITAL OUTPUT, PCM ONLY, LPCM OUTPUT, 2 kHz X2, ENTER/OK
View all Yamaha DVD-S550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Setup Menu Setting the Digital output The options included in Digital Audio are: 'Digital Output' and 'LPCM Output'. 1 In 'AUDIO SETUP PAGE', press 34 to highlight {DIGITAL AUDIO}, then press 2. 2 Press the 34 to highlight an option. 3 Enter its submenu by pressing 2. 4 Move the cursor by pressing the 34 to highlight the selected item. DIGITAL OUTPUT Set the Digital output according to your optional audio equipment connection. OFF Turn off the digital output. ALL If you have connected your DIGITAL AUDIO OUT to a multi-channel decoder/ receiver. PCM ONLY Only if your receiver is not capable of decoding multi-channel audio. LPCM OUTPUT If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc., you may need to adjust 'LPCM Output'. Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality. 48K Playback a disc recorded at the sampling rate of 48kHz. 96kHz (if available on disc) PCM data stream will be converted to 48kHz. 96K Playback a disc recorded at the sampling rate of 96kHz. If the 96kHz disc is copy protected, the digital output will be muted to comply with the standards. CD Upsampling This feature allows you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. If you have activated the upsampling, the player will automatically switch to stereo mode. 1 In 'AUDIO SETUP PAGE', press 34 to highlight {CD UPSAMPLING}, then press 2. OFF Select this to disable CD-upsampling. 88.2 kHz (X2) Select this to convert the sampling rate of the CDs twice higher than the original. 176.4 kHz (X4) Select this to convert the sampling rate of the CDs four times higher than the original. 2 Press 34 to select a setting, then press ENTER/OK to confirm your selection. Note: - This setting is only applicable for the signals output from the analog jacks. TIPS: To return to the previous menu, press 1. To remove the menu, press SETUP. 20