Yamaha DVX-C300SW Owners Manual - Page 16

Connections 1 Connect the speaker cable with the white line to the + connector on the front/center/surround speaker and with the black band to the - connector. 3 Connect the subwoofer to the DVD receiver using the system control cable from the subwoofer to the TO NX-SW300 terminal at the rear of the DVD receiver. Lever White line Black band Press the lever down, -+ then insert the cable into the hole and release the lever. 2 Connect the speaker cable with the white line to the + connector of each terminal on the subwoofer and with the black band to the - connector. Lever White line SPEAKERS Black band FRONT CENTER SURROUND Lift up the lever, then insert the cable into the hole and replace the lever. SYSTEM CONNECTOR TO NX-SW300 Notes: - Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to a short-circuit. - When connecting the speakers, fix the speaker cables in place so that cables do not loosen. If your foot or hand accidentally gets caught on a loose speaker cable, the speaker may fall. - To prevent unwanted noise, do not place the subwoofer too close to the DVD receiver, AC power adaptor,TV or other sources of radiation. 12