Yamaha DVX-C300SW Owners Manual - Page 18

Connections Connecting a progressive scan TV Placing the speakers and subwoofer DVD Receiver Front Speaker (Left) 1 Center speaker 2 Front Speaker (Right) 1 TV FM ANT GND AM ANT 75W UNBAL VIDEO OUT (DVD ONLY) S VIDEO DIGITAL IN COMPONENT COAXIAL VIDEO PCM/DTS q DIGITAL SYSTEM CONNECTOR TV IN AUX IN LINE OUT TO NX-SW300 DVD Receiver IMPORTANT! - Progressive scan video quality is only available when using Y PB PR in conjunction with a progressive scan TV. Using component video output (Y PB PR) 1 Use the component video cables (red/blue / green - not supplied) to connect the DVD receiver's Y PB PR jacks to the corresponding component video input jacks (or Y Pb/Cb Pr/Cr/ YUV jacks) on the TV. 2 Activate the progressive scan function (see "Progressive function-(on/off)" on page 32). 3 Surround Speaker (Left) 4 Subwoofer 3 Surround Speaker (Right) For the best possible surround sound, all of the speakers (except the subwoofer) should be placed at the same distance from the listening position. 1 Place the front left and right speakers at equal distances from the TV. 2 Place the center speaker above the TV so that the center channel's sound is localized. 3 Place the surround speakers at normal listening ear level facing each other or hang on the wall. 4 Place the subwoofer on the floor near the TV. Notes: - To avoid magnetic interference, do not position the front speakers too close to your TV. - Allow adequate ventilation around the DVD receiver and subwoofer. 14