Yamaha EZ-AG Owner's Manual - Page 8

Names Of the Parts, Controls, and Connectors I Body Bridge Plate Strings that are sounding can be muted by touching the bridge plate with side or heel of the right hand. Be sure to touch the plate on the back of the neck with your left hand while touching the bridge plate with your right hand (See Page 12.) Strings The strings can be played either with a pick or finger style. LED Control Section Frets EZ-AG frets 1 through 6 are illuminated and will glow red when pressed. When the PLAY MODE is set to CHORD or BOTH, the appropriate frets will glow to indicate the frets you should press. Connector & Power Switch Section • When the CAPO function is used an entire column of frets will glow at the capo position. Control Section !0 q PLAY MODE 1 2 3 STRUM CHORD BOTH START/STOP START/STOP START/STOP DEMO START/STOP SOUND SELECT SONG SELECT VALUE RESET 0.0.0. TEMPO CAPO VOLUME TUNING w e o i u yt r q VALUE [+]/[-] Buttons These buttons are used to select sounds and songs as well as adjust tempo, volume, balance, and other parameters. Press the [+] button once to increment the value by one, or press the [-] button once to decrement the value by one. Holding either button causes continuous incrementing or decrementing in the corresponding direction. Press both the [+] and [-] buttons simultaneously to reset the initial default value for the selected parameter. w Display Displays the value of the parameter being edited, as well as the currently selected tempo. e [VOLUME] Button This button allows adjustment of both the instrument's overall volume, and the balance between the played and accompaniment sound. 8 EZ-AG 6