Yamaha EZ-TP Owner's Manual - Page 31
Setting the Transmit Channel, Local Control ON/OFF, Press
View all Yamaha EZ-TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Connecting to MIDI Devices Setting the Transmit Channel This procedure sets the MIDI channel via which the EZ-TP data will be transmitted. The possible settings are: off, 1 ~ 16. 1 Press the button so that the upper indicator lights. 2 Press the [MIDI] button. 3 Use the [-]/[+] buttons to select "off," or MIDI channel 1 ~ 16. When "off" is selected no data will be transmitted by the EZ-TP. Local Control ON/OFF This setting determines whether the EZ-TP plays its own internal tone generator or not. on (on) : This is the normal setting, in which notes you play on the EZ-TP are sounded by the EZ-TP itself. Also, all performance data (not including song playback) is transmitted via the MIDI connector. off (oFF) : Notes played on the EZ-TP are not sounded by the EZ-TP itself, but will be sounded by an external MIDI tone module if the appropriate MIDI connections are made. EZC (E2C) : Notes played on the EZ-TP are not sounded by the EZ-TP. This setting is provided for future expansion. The initial default setting is "on." 1 Press the button so that the upper indicator lights. 2 Press the [MIDI] button - the button will light. 3 Press and hold the [MIDI] button use the [-]/[+] buttons to select "on" or "off." on NOTE • No sound will be produced by the EZ-TP when Local Control is set to either "off" or "EZC." The internal EZ-TP tone generator will only sound when Local Control is turned "on." EZ-TP Owner's Manual 31 29