Yamaha HTR-5950 Owners Manual - Page 17
Connecting speakers, CAUTION
UPC - 027108925547
View all Yamaha HTR-5950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
PREPARATION CONNECTIONS Connecting speakers Be sure to connect the left channel (L), right channel (R), "+" (red) and "-" (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. CAUTION • Before connecting the speakers, make sure that this unit is set to the standby mode (see page 27). • Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could damage this unit and/or speakers. • Use magnetically shielded speakers. If this type of speakers still creates the interference with the monitor, place the speakers away from the monitor. • If you are to use 4 or 6 ohm speakers, be sure to set "SP IMP." to "6ΩMIN" before using this unit (see page 26). Notes • A speaker cord is actually a pair of insulated cables running side by side. Cables are colored or shaped differently, perhaps with a stripe, groove or ridge. Connect the striped (grooved, etc.) cable to the "+" (red) terminals of this unit and your speaker. Connect the plain cable to the "-" (black) terminals. • The low-frequency signals of other speakers set to "SML" (or "SMALL") or to "NONE" in "SPEAKER SET" (see pages 78 and 79) are directed to the speakers selected in "LFE/BASS OUT" (see page 79). Front speakers (A) Right Left Surround speakers Right Left Subwoofer 1 2 4 5 7 OUTPUT SUB WOOFER FRONT SPEAKERS SURROUND A B CENTER SURROUND BACK (U.S.A. model) Front speakers (B) 3 Center speaker 6 Surround back speaker 13