Yamaha KX-W482 Owner's Manual - Page 7

DOLBY NR selector setting (in step 4) Be sure to set the DOLBY NR selector according to the system used for recording. OFF: For a tape recorded with DOLBY NR OFF. B: For a tape recorded with DOLBY B NR. C: For a tape recorded with DOLBY C NR. * Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. "DOLBY" and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. REVERSE MODE selector setting (in step 5) The auto reverse function allows the tape running direction to be reversed automatically. Select an auto reverse mode ("), manual reverse mode (") or RELAY playback mode. ": When playback or fast forwarding (or rewinding) of one side of a tape is finished, the deck stops at the end of the tape. ": Both sides of the tape are repeatedly played back (up to 8 times). ÷ When the tape is fast forwarded to the end of a side, playback automatically starts from the other side. When the tape is rewound to the beginning of a side, playback automatically starts from the beginning. RELAY: Cassette tapes loaded in DECKs A and B are played back sequentially. (See "RELAY PLAYBACK" on page 9.) Display during playback KX-W582 Tape counter Tape running direction indicator (DECK A) Tape running direction indicator (DECK B) Tape counter ¤ A ‹ SYNCHRO ¤ B ‹ REC DUB NORM HIGH REC DSS PRESET HALL DISCO CHURCH JAZZ CLUB PROGRAM indicators L dB - 30 20 15 10 8 6 4 2 0 2 4 6+ R Peak level meters Indicate the peaks of the signal levels during recording and playback over a -30 dB to +6 dB range. There are separate meters for each left and right channel. These level meters have a peak hold function which holds the peak level for about 1.5 seconds. KX-W482 Tape counter Tape running direction indicator (DECK A) Tape running direction indicator (DECK B) Tape counter ¤ A ‹ SYNCHRO ¤ B ‹ REC DUB NORM HIGH REC L dB - 30 20 15 10 8 6 4 2 0 2 4 6+ R Peak level meters Indicate the peaks of the signal levels during recording and playback over a -30 dB to +6 dB range. There are separate meters for each left and right channel. These level meters have a peak hold function which holds the peak level for about 1.5 seconds. To adjust the volume level Use the volume control of the amplifier or receiver. Note Never press the EJECT button during playback. To use headphones Insert the headphones plug into the PHONES jack. Since the sound is also heard from the speakers, operate the amplifier to cut off the sound from the speakers for private listening. 7