Yamaha KX-W482 Owner's Manual - Page 8

s RESET ! ⁄ DECK A DECK B MUTE/SEARCH SELECTION SEARCH - To play back a desired selection by searching for the beginning of the selection To search for the next selection When the # tape running indicator is lit: ⁄ MUTE/SEARCH + When the @ tape running indicator is lit: ! MUTE/SEARCH + Press simultaneously. Press simultaneously. To search for the beginning of the current selection When the # tape running indicator is lit: ! MUTE/SEARCH + Press simultaneously. When the @ tape running indicator is lit: ⁄ MUTE/SEARCH + Press simultaneously. To search for the selection located before the current selection ÷ Operate the following buttons when the beginning of the current selection is being played. When the # tape running indicator is lit: ! MUTE/SEARCH + When the @ tape running indicator is lit: ⁄ MUTE/SEARCH + Press simultaneously. Press simultaneously. Notes ÷ The blank interval between selections must be at least 4 seconds long. ÷ Selection search may not operate properly with tapes recorded at a low recording level or which have excessive noise. ÷ Use the tape counter to aid in locating a point on a tape (0000 to 9999). To set the counter reading to "0000", press the RESET button. 8