Yamaha LS9-32 Ls9 Editor Installation Guide - Page 6

Network Settings When you connect the computer to the LS9 directly • Settings of the LS9 You can use the following initial settings. IP address Gateway address Subnet mask 192.168.0.128 192.168.0.1 255.255.255.0 • Settings of the computer We recommend that you make the following settings. IP address Subnet mask Default gateway (Router) 192.168.0.3 255.255.255.0 192.168.0.1 When you connect the computer to the LS9 via LAN Make the network settings of the LS9 and your computer in accordance with your LAN. Please contact your network administrator for further detail. Also, please refer to "Caution for connecting LS9 to LAN" in the "Technical Documents" section on the following web site: http://www.yamahaproaudio.com/downloads/documents/ • Settings of the LS9 IP address Gateway address Subnet mask Sets the IP address so that it does not conflict with the IP address of any other device on the network. Set the IP address of the gateway when the gateway exists. Set the vacant address when the gateway does not exist. The address should be set in the same subnet as IP address within LAN in which the subnet is set. Set the subnet mask of the subnet connected to the LS9. LS9 Editor Installation Guide 6