Yamaha M125 Owners Manual - Page 3
Using the NS-M125 as surround speakers in a surround sound system, English
UPC - 027108927220
View all Yamaha M125 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
English ■ Using the NS-M125 as surround speakers in a surround sound system The speakers can be mounted on a wall by using the bracket attached to the speakers' back panels. Fasten screws into a firm wall or wall support as shown in the figure below, and hang the holes on the protruding screws. NS-M125 Diam. 3.5 to 4 mm (1/8") Min. 20 mm (3/4") 3 mm (1/8") Tapping screw (commercially available) Holes Wall or wall support Make sure that the screws are caught by a narrow part of the holes securely. 26 mm (1") WARNING: • Each speaker weights 2 kg (4.4 lbs). Do not mount them on thin plywood or soft wall surface material, as the screws may come out of the flimsy surface, causing the speakers to fall down and be damaged, or result in personal injury. • Do not fasten the speakers to wall with nails, adhesives, or other unsound hardware. Long term use and vibrations may cause them to fall down. • To avoid accidents resulting from tripping over loose speaker cords, fix them to the wall. Note: You can also use the screw holes on the bottom of the NS-M125 for installing the speakers on commercially available speaker stands. A screw with a diameter of 6 mm (1/4") can be used (Hole depth: 20 mm, 3/4") 60 mm (2-3/8") • Before installing, please refer to the instruction manual of the speaker stand. E-3