Yamaha M125 Owners Manual - Page 5
Connecting Your Speakers, Preparing Your Speaker Cables, Hookup, Using a Banana Plug
UPC - 027108927220
View all Yamaha M125 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
English Connecting Your Speakers Always turn off your amplifier or receiver before making any connections. ■ Preparing Your Speaker Cables Carefully remove 10 mm (3/8 ")of insulation from both ends of your speaker cables and twist the bare wires tightly, as shown. 10 mm (3/8 ") ■ Hookup NS-C125 Good No Good Tighten + Loosen FRONT CENTER OR R SURROUND L + - Amplifier or receiver - NS-M125 Notes: • Make sure that the bare wires are not touching each other as this could damage the speaker and amplifier. • Connect one speaker to the left terminals of your amplifier, and another speaker to the right terminals, making sure not to reverse the polarity (+, -). If one speaker is connected with reversed polarity, the sound will be unnatural and lack bass. ■ Using a Banana Plug 1. Remove the speaker terminal cover by gently pulling it toward you. 2. Tighten the terminal knob. 3. Simply insert the banana plug into the terminal. 3 Banana Plug 1 2 E-5