Yamaha M7CL Studio Manager V2 Installation Guide - Page 3
Studio Manager, Installing the Software, Precautions when using the USB TO HOST connector - manual pdf
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Precautions when using the USB TO HOST connector When connecting the computer to the USB TO HOST connector, make sure to observe the following points. Failing to do so risks freezing the computer and corrupting or even losing the data. If the computer or the instrument freezes, turn the power to the instrument off or restart the computer. CAUTION • Before connecting the computer to the USB TO HOST connector, exit from any power-saving mode (such as suspended, sleep, standby) of the computer. • Before turning on the power to the instrument, connect the computer to the USB TO HOST connector. • Execute the following before turning the power to the instrument on/off or plugging/unplugging the USB cable to/from the USB TO HOST connector. - Quit any open applications. - Make sure that data is not being transmitted from the instrument. (Data is transmitted only by playing notes on the keyboard or playing back a song.) • While a USB device is connected to the instrument, you should wait for six seconds or more between these operations: (1) when turning the power of the instrument off then on again, or (2) when alternately connecting/disconnecting the USB cable. Studio Manager Studio Manager is a cross-platform application that enables you to start multiple Editors that control YAMAHA hardware products remotely, and to save multiple Editor settings. You can run Studio Manager as a stand-alone application, or as a plug-in within DAW (digital audio workstation)/ sequencer applications that are compatible with Total Recall, such as Cubase SX 3.0.1 or later. In either case, the basic functionality is the same. For the latest information on compatible DAW applications, refer to the following website. http://www.studioconnections.org/ Installing the Software The actual installation steps and the use of the software itself differs depending on the operating system that you are using. Please refer to the appropriate installation instructions. Procedures 1 Verify that your system meets the operating requirements of each software program. 2 Install the appropriate driver to your computer. 3 Install the Studio Manager and each editor. 4 Start up the Studio Manager, then start up the editor. Windows Macintosh page 4 page 7 page 4 page 7 page 6 page 8 Refer to the PDF manual and installation guide for your particular editor. For subsequent operations, refer to the PDF manual from the [HELP] menu in each software program. Studio Manager Version 2 Installation Guide 3