Yamaha MG20XU Owner's Manual - Page 26

AUX1 AUX2/FX, AUX2 AUX3 (*) AUX4/FX, AUX4 (*) GROUP 1 GROUP 2 GROUP 3 (*) GROUP 4 (*) STEREO L STEREO R Controls and Connectors u [SEND MASTER] section (*) Only MG20XU, MG20, MG16XU and MG16 AUX1 AUX2 (*) AUX3 AUX4 SEND AUX1 [+4dBu] SEND AUX2 [+4dBu] SEND AUX3 [+4dBu] SEND AUX4 [+4dBu] MG20XU/MG20/MG16XU/MG16: [AUX1 - 4] knobs MG12XU/MG12: [AUX1 - 2] knobs i [GROUP] section (*) Only MG20XU, MG20, MG16XU and MG16 GROUP 1-2 G1 MONI G2 MONI ON ST (*) GROUP 3-4 ON ST G3 MONI G4 MONI GROUP OUT 1 [+4dBu] GROUP OUT 2 [+4dBu] GROUP OUT 3 [+4dBu] GROUP OUT 4 [+4dBu] MG20XU/MG20 MG16XU/MG16 MG12XU/ MG12 For adjusting the levels of the signals output to the [SEND] jacks and [AUX1 - 4]. • [ON] switch Turn this switch on ( ) to activate the [GROUP] fader. The switch lights when on. • [GROUP 1-2] fader For adjusting the level of the signal output to the [GROUP OUT 1, 2] jacks. • [GROUP 3-4] fader (MG20XU/MG20/MG16XU/ MG16) For adjusting the signal level to the [GROUP OUT 3, 4] jacks. • [ST] switch If this switch is on ( ), the signals are sent to the STEREO L/R bus via the [GROUP 1-2, 3-4] faders. The GROUP 1 and 3 signal goes to the STEREO L bus, and the GROUP 2 and 4 signal goes to the STEREO R bus. 26 MG20XU/MG20/MG16XU/MG16/MG12XU/MG12 Owner's Manual