Yamaha MS101II Owner's Manual - Page 4

Front Panel / Rear Panel CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. 1 STANDBY/ON switch/indicator Press this switch to switch the power between STANDBY and ON. When the power is turned on, the STANDBY/ON indicator comes on. CAUTION: A small amount of electric current is flowing even when the power is in the STANDBY mode. When not using the MS101II for an extended period of time, be sure to discon-nect the power cord from the AC outlet. 2 LOW control Turn this control clockwise to boost low frequencies and counterclockwise to reduce them. 3 HIGH control Turn this control clockwise to boost high frequencies and counterclockwise to reduce them. 4 VOLUME control Use this control to set the volume level. 5 MIC INPUT A dynamic type microphone can be connected to this 1/4 inch phone jack. 6 Line 1 Input The line level output from a CD player, DAT recorder, cassette recorder, or VCR can be connected to this RCA pin jack. 7 Line 2 Input Any audio equipment that produces a line level output can be connected to this 1/4 inch phone jack, i.e., synthesizer, mixer, multitrack cassette recorder, effects unit, etc. 8 Line Out A cassette recorder or DAT recorder can be connected to this 1/4 inch phone jack for recording. Input signals from the Mic, Line 1, and Line 2 inputs are mixed, then output here. Another MS101II can be connected to this jack for parallel operation. The front panel volume knob doesn't effect the volume level of this line out. 2