Yamaha MY4-AEC MY4-AEC Owners Manual - Page 11
Loosen terminal screws., Insert cables., Securely tighten terminal, screws., Loosen., Slotted
View all Yamaha MY4-AEC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
1 Loosen terminal screws. 2 Insert cables. Loosen. Slotted Screwdriver Terminal + Screw - G Euroblock Plug Tab NOTE A slotted screwdriver with a blade width of about 3 millimeters is recommended. 3mm or less 3 Securely tighten terminal screws. Pull the cables (not too strongly) to confirm that they are securely connected. MY4-AEC Owner's Manual 11
MY4-AEC Owner’s Manual
11
1
Loosen terminal screws.
NOTE
A slotted screwdriver with a blade width of
about 3 millimeters is recommended.
2
Insert cables.
3
Securely tighten terminal
screws.
Pull the cables (not too strongly) to
confirm that they are securely
connected.
Loosen.
Slotted
Screwdriver
Terminal
Screw
Euroblock
Plug
Tab
3mm or less
+
–
G