Yamaha MY4-AEC MY4-AEC Owners Manual - Page 14
DME24N, MY4-AEC, Make the required virtual connections in the DME Designer configuration, window.
View all Yamaha MY4-AEC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Meeting Room (Near End) Speaker 1 OUT (Analog) DME24N + MY4-AEC Speaker 2 IN (Analog) Microphone 1 Microphone 2 Microphone 3 Microphone 4 3 Make the required virtual connections in the DME Designer configuration window. • Connect the signals from microphone inputs 1 - 4 to the "Near-end Mic. 1" - "Near-end Mic. 4" inputs on the AEC component. • Place an oscillator that will be used for AEC adjustment in the configuration window and connect it to the AEC component "From Far-end A" input. • The "Far-end voice A" output is connected to the conference room speakers (SP 1 and SP 2) in parallel. 14 MY4-AEC Owner's Manual
14
MY4-AEC Owner’s Manual
3
Make the required virtual connections in the DME Designer configuration
window.
•
Connect the signals from microphone inputs 1 – 4 to the “Near-end Mic. 1” – “Near-end
Mic. 4” inputs on the AEC component.
•
Place an oscillator that will be used for AEC adjustment in the configuration window and
connect it to the AEC component “From Far-end A” input.
•
The “Far-end voice A” output is connected to the conference room speakers (SP 1 and
SP 2) in parallel.
Meeting Room (Near End)
Speaker 1
Speaker 2
Microphone 1
Microphone 2
Microphone 3
Microphone 4
IN
(Analog)
OUT
(Analog)
DME24N
MY4-AEC
+