Yamaha NS 333 MCXSP10 Manual - Page 3

REMOVING THE FRONT COVER The front cover is fastened to the enclosure at four points and can be removed if desired. To remove the cover, hold on to both sides and slowly pull straight away from the speaker. To reattach, line up the four pegs on the inside surface of the cover with the four corresponding holes on the speaker and push gently. SPECIFICATIONS Type 2-way bass reflex speaker system magnetic shielding type Driver 13 cm (5") cone woofer 2.5 cm (1") dome tweeter Frequency response 60 Hz - 35 kHz Nominal impedance 6 ohms Nominal input power 60 W Maximum input power 150 W Sensitivity 87 dB/2.83 V/m Crossover frequency 3 kHz Dimensions (W x H x D) ... 200 mm x 320 mm x 213 mm (7.9"x 12.6" x 8.4") Weight 5.5 kg (12 lbs. 2 oz.) Note When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools. • Specifications subject to change without notice due to product improvements. • Care should be taken not to exceed the input power values noted above. English 3