Yamaha NS-SW310BL Owner's Manual - Page 14
Connecting to the INPUT1/OUTPUT terminals of the subwoofer, Plug in the subwoofer to the AC outlet
View all Yamaha NS-SW310BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
CONNECTIONS Connecting to the INPUT1/OUTPUT terminals of the subwoofer For connection, keep the speaker cables as short as possible. Do not bundle or roll the excess cabling. If the connections are faulty, no sound will be heard from the subwoofer or the speakers, or both. Make sure that the + and - polarity markings of the speaker cables are observed and connected correctly. If these cables are reversed, the sound will be unnatural and lack bass. Caution Do not let the bare speaker wires touch each other, because this could damage the subwoofer or the amplifier, or both of them. Plug in the subwoofer to the AC outlet After all connections are completed, plug the subwoofer and other audio/video components into AC outlets. ■Before connecting Remove 10 mm (3/8") of insulation from the ends of the speaker cables. 10 mm (3/8 ") To AC outlet Good No Good ■How to connect 1 Loosen the terminal's knob, as shown in the figure. 2 Insert the bare wire. 3 Release your finger from the tab to allow it to lock securely on the cable's wire end. 4 Test the firmness of the connection by pulling lightly on the cable at the terminal. Red: positive (+) Black: negative (-) + 1 2 - 10 En