Yamaha NX-SW70 Owner's Manual - Page 5

USING THE SPEAKER MOUNTING BRACKETS Use the provided type A wall brackets when hanging the rear speakers on a wall. 1 Attach two commercially available wood screws (diameter about 4 mm) in the location on the wall where the rear speaker is to be hung, and then mount the bracket on the wood screws. Check that the wood screws are secure inside the narrow portion of the holes in the bracket. s To mount speakers directly to the wall It is possible to hang the speakers directly on the wall without using the type A brackets by attaching two wood screws to the wall and then using the holes on the rear panel of the speakers for direct attachment. Wood screws having a diameter of about 4 to 5 mm (commercially available) 65 mm 20 mm or more Type A bracket 2 Attach the speaker to the bracket using the provided wing nut. 65 mm 65 mm 5 mm 20 mm or more Note • After mounting, check that the speakers are attached securely. s YAMAHA speaker stand SPS-AV1 (sold separately) The rear speakers can also be attached to SPS-AV1 speaker stands and used as floor stand speakers. Wing nut (provided) 3 Adjust the angle of the speaker and then tighten the wing nut. English 3