Yamaha P-70 Owner's Manual - Page 11

ENGLISH Before Using the P-70 Before Using the P-70 Turning the Power On 1. Connect the PA-5D power adaptor's DC cable to the [DC IN 12V] jack. 2. Plug the AC adaptor into an AC outlet. WARNING Use ONLY a Yamaha PA-5D AC Power Adaptor (or other adaptor specifically recommended by Yamaha) to power your instrument from the AC mains. The use of other adaptors may result in irreparable damage to both the adaptor and the P-70. CAUTION Unplug the AC Power Adaptor when not using the P-70, or during electrical storms. (The shape of plug differs depending on locale.) 3. Press the [STANDBY/ON] switch to turn the power on. The power indicator located to the left of the [STANDBY/ON] switch lights up. NOTE When turning off the power, press and hold down the [STANDBY/ON] switch for a short time until the power turns off. The P-70 uses this power-off procedure as a "safety" device to prevent the power from being inadvertently turned off during performance. CAUTION Even when the instrument is turned off, electricity is still flowing to the instrument at the minimum level. When you are not using the P-70 for a long time, make sure you unplug the AC power adaptor from the wall AC outlet. Setting the Volume Initially set the [MASTER VOLUME] slider about halfway between the "MIN" and "MAX" settings. Then, when you start playing, re-adjust the [MASTER VOLUME] slider to the most comfortable listening level. The level decreases. The level increases. TERMINOLOGY MASTER VOLUME: The volume level of the entire keyboard sound P-70 Owner's Manual 11