Yamaha PF-500 Owner's Manual - Page 41
track to change.
View all Yamaha PF-500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Recording Your Performance Changing a voice or tempo after recording You can change the voice and tempo after recording to change a song's feel or to set a more suitable tempo. You can also change these elements in the middle of a song. Procedure 1. Select a song you wish to change by using the SONG SELECT [ ] [ ] buttons. 2. To change the voice or tempo in the middle of the song, specify the measure to change using the B [-]/ [+] buttons. 3. Change the settings (voice, reverb, etc.). For example, if you wish to change the recorded E.Piano1 voice to E. Piano2, use the voice group buttons and the A [-]/[+] buttons to select E.Piano2. When the setting is complete, press one of the SONG SELECT [ ] [ ] buttons once to return to the song select screen. 4. Press and hold down the [REC] button and select the track to change. The indicator for the selected track lights up in red. Change the tempo setting now, if necessary. At this point, do not play the keyboard or press the SONG [START/ STOP] button. Otherwise, recording will start, erasing the recorded data. 5. Press the [TOP] or [REC] button to exit record mode. NOTE When the starting method is set to "KeyOn," you cannot change a voice or tempo (page 38) after the recording is complete. TIP Refer to "Questions about Operations and Functions" on page 90 for information on the settings that can be changed here. TIP Change the tempo in Step 4. CAUTION The edited settings (except for the tempo setting) will be saved in memory and you will not be able to restore the previous settings. Proceed with caution. PF-500 41