Yamaha PSR-5700 Owner's Manual (feature Reference) - Page 6

The Sequencer Playback ZStart Playback SYNCHRO START/ START RE-START STOP PLAY REC PLAY REC PLAY REC PLAY REC PLAY REC PLAY REC PLAY 1 2 3 4 5 6 7 CHORD 1 CHORD 2 CHORD 3 CHORD 4 CHORD 5 CHORD 6 BAS RECORD DELETE EDIT Since tracks are automatically set to the PLAY mode once they have been recorded, and tracks containing data are automatically set to the PLAY mode when the sequencer is initially engaged by pressing the [SEQUENCER] button, all you have to do to play back a sequence is to press the [START/RE-START] button. If you first press the [SYNCHRO START] button, sequencer playback can be started by playing any key on the keyboard. Any of the PLAY tracks can be muted before or during playback by pressing the corresponding track button. The PLAY indicator will flash when a track is muted. Normal playback can be restored by pressing the track buttons of muted tracks a second time (the PLAY indicator will light continuously). Before starting playback you can use the [r] and [f] buttons to move to any measure number from which you want to begin playback. The [p] button goes HINT directly to measure number 1. p r f If the Super Styleplay section change parameter (page 41) is turned ON during ACCOMP. track playback, the Super Styleplay section will change in accordance DETAIL with accompaniment variation transitions and the result may be different from the recorded data. XPlay along If You Like You can play along with the sequence using the entire PSR-5700 keyboard, selecting different voices and changing the tempo as required (subsequently recorded tempo changes will still take effect). Parameters That Can Be Changed During Playback • Style select (styles with different time signatures cannot be selected) • Volume (rhythm, bass, chord 1 & chord 2) • Tempo • Reverb & effect on/off • Pad repeat and break on/off • Interactive Accompaniment on/off & accompaniment variation (VERSE 1, VERSE 2, CHORUS 1, CHORUS 2, SOLO) • Pad • Some FUNCTION parameters (pages 26 through 58) If changes to any of the above parameters are recorded in the sequence, the recorded changes will still take effect even if you manually change the parameters DETAIL while playing. CStop Playback SYNCHRO START/ START RE-START STOP Playback will stop automatically when the end of the sequence is reached. At this point the parameters recorded on the ACCOMP. track will revert to their initial values. You can also stop playback at any time by pressing the [STOP] button. VPress [EXIT] When Done FUNCTION Press the [EXIT] key to exit the sequencer mode and return to the normal play mode. The sequencer mode can also be exited by pressing the [SEQUENCER] button. EXIT 6