Yamaha PSR-I455 Owner's Manual - Page 29

Quick Guide Recording Your Performance Recording to a Specified Track The operation here is useful especially when you want to record the additional performances to an already recorded Song. 1 Press the [SONG] button, then select the desired User Song (111-120) as the recording target. User 1 111 Song number 2 While holding down the [REC] button, press the desired Track button to enter the Record Ready mode.  If you want to record only the melody: While holding down the [REC] button, press one of the [1]-[5] buttons. 3 Same as in Steps 4 to 6 (page 28) in "Quick Recording." NOTE • If the memory becomes full while recording, an alert message will appear and recording will stop automatically. In this case, delete unnecessary data by using the Clear functions (page 30), then execute the recording again. Limitations while recording • The on/off status of ACMP cannot be changed. • The Style number cannot be changed. • When you use a Style, the following parameters cannot be changed: Reverb Type, Chorus Type, Time Signature, Style number and Style Volume. • Performance with a Split Voice cannot be recorded. Press and hold User 1 rEC 001 Track 1 will flash  If you want to record only the Style playback: Press the [STYLE] button, select the desired Style, then simultaneously hold down the [REC] button and press the [6/A] button. ACMP is automatically turned on. Press and hold User 1 rEC 001 PSR-I455 Owner's Manual 29