Yamaha RX-V385 RX-V385 Owner s Manual - Page 30
Warning messages from YPAO, TV screen, Front display
View all Yamaha RX-V385 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Warning messages from YPAO If a warning message is displayed after the measurement, you can still apply the measurement results by following on-screen instructions. However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings. Warning message TV screen Problem speaker (blinks) LINK MASTER STEREO TUNED ZONE SLEEP PARTY 2 A 3 B OUT 2 Hi-Res ENHANCER YPAO VOL. A- DRC ECO W-1:PHASE VOL. MUTE VIRTUAL FPL FPR SL SW SR SBL SB SBR Front display Warning message Cause Remedy Check the cable connections (+/-) of the problem speaker. W-1:Out of Phase (W-1:PHASE) W-2:Over Distance (W-2:DISTANCE) W-3:Level Error (W-3:LEVEL) If the speaker is connected incorrectly: A speaker cable may be connected with the reverse polarity (+/-). Turn off the unit, reconnect the speaker cable. If the speaker is connected correctly: Depending on the type of speakers or room environment, this message may appear even if the speakers are connected correctly. In this case, you can ignore the message. A speaker is placed more than 24 m (80 ft) from the listening position. Exit YPAO, turn off the unit, and place the problem speaker within 24 m (80 ft) of the listening position. Check the usage environment and cable connections (+/-) of each speaker, and the volume of the subwoofer. If there is There are significant volume any problem, exit YPAO, turn off the unit, differences between the and then reconnect speaker cable or speakers. correct the speaker positions. We recommend using the same speakers or speakers with specifications that are as similar as possible. Note Text in parentheses denotes indicators on the front display. 30 En