Yamaha RX-V385 RX-V385 Owner s Manual - Page 71
Setting the equalizer, Outputting test tones, When selecting GEQ
View all Yamaha RX-V385 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Setting the equalizer Selects the type of equalizer to be used and adjusts the tone. Setup menu "Speaker" > "Equalizer" > "EQ Select" Settings PEQ GEQ Off Applies the parametric equalizer values obtained by the YPAO measurement. Select this option when you want to adjust the equalizer manually. Does not use the equalizer. When selecting "GEQ" 1 Use the cursor keys to select "Channel" and to select the desired speaker channel. 2 Use the cursor keys to select the desired band (frequency) and to adjust the gain. Setting range -6.0 dB to +6.0 dB 3 Press SETUP. This completes the settings. Note ▪ Test tone output helps you to adjust the equalizer while confirming its effect. For details, see the following: - "Outputting test tones" (p.71) ▪ "PEQ" is available only when the YPAO has been performed. For details on the YPAO, see the following: - "Optimizing the speaker settings automatically (YPAO)" (p.27) Outputting test tones Enables/disables the test tone output. Test tone output helps you to adjust the speaker balance or equalizer while confirming its effect. Setup menu "Speaker" > "Test Tone" Settings Off Does not output test tones. On Outputs test tones automatically when you adjust the speaker balance or equalizer. 71 En