Yamaha SHS-500 SHS-500 Owners Manual - Page 18
Using Batteries, Open the battery compartment cover located on the instrument's bottom panel.
View all Yamaha SHS-500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Using Batteries This instrument requires six "AA" size, Alkaline (LR6)/ Manganese (R6) batteries, or rechargeable nickel-metal hydride batteries (rechargeable Ni-MH batteries). Setting the battery type Depending on the battery type to be used, you may need to change the battery type setting on this instrument. To change the setting, first turn on the power to the instrument, then choose the battery type you would like to use. Alkaline and manganese batteries are chosen by default. Press the [FUNCTION] button repeatedly to select "Battery," then rotate the [SELECT] knob to select the battery type "Alkaline" (Alkaline and manganese batteries) or "Ni-MH" (rechargeable Ni-MH batteries). NOTICE Failure to set the battery type may shorten the amount of the battery life. Make sure to set the battery type correctly. 1. Make sure that the power of the instrument is off. 2. Open the battery compartment cover located on the instrument's bottom panel. 3. Insert the six new batteries, being careful to follow the polarity markings on the inside of the compartment. 4. Replace the compartment cover, making sure that it locks firmly in place. NOTICE • Connecting or disconnecting the power adaptor with batteries installed may turn the power off, resulting in loss of data. • When battery power becomes too low for proper operation, the volume may be reduced, the sound may be distorted, and other problems may occur. When this happens, make sure to replace all batteries with new ones or already recharged ones. NOTE • This instrument cannot be used to charge the batteries. Use only the specified charger device when charging. • Power will be automatically drawn from the AC adaptor if an AC adaptor is connected while batteries are installed in the instrument. 18 SHS-500 Owner's Manual