Yamaha SP2060 SP2060 V1.3 Supplementary Manual

ES

EN

DE

FR

This supplemental manual describes functions that have been newly added or modified for SP2060

firmware version 1.3. Please read this manual along with the SP2060 Owner’s Manual and the DME

Designer Owner’s Manual.

•

The User Lock function enables you not only to lock the

entire panel operation but also to lock each key.

•

If a password has been set for the User Lock function, the

same password now applies to switching scene protection on

or off.

•

The SP2060 Backup function has been added to the DME

Designer, enabling you to back up the SP2060 data to a com-

puter and to restore the data on multiple SP2060 units. Refer

to the DME Designer Owner’s Manual for details.

•

The following speaker processor libraries have been added.

IS1112

IS1112+IF2108 (Settings for combination of IS1112 and

IF2108)

IS1112+IF2208 (Settings for combination of IS1112 and

IF2208)

Parameter settings can be “locked” temporarily to prevent acci-

dental mis-operation. This function is useful to avoid uninten-

tional operations or to prevent others from operating the panel

controls. You can specify a password for User Lock.

You can specify one or more of the following keys to lock the pa-

rameter setting assigned to that key.

[LEVEL] key, [DELAY] key, [EQ] key, [ROUTING] key, [X-

OVER] key, [LIMITER] key, [SCENE] key, [UTILITY] key

1.

Press the [UTILITY] key to select the Utility dis-

play.

The most recently used Utility display will appear.

2.

Press the [UTILITY], [NEXT] or [BACK] key

repeatedly until the User Lock page appears.

3.

Press the [NEXT] key twice to display the User

Lock Detail page.

The front panel keys in the range from the [LEVEL] key to

the [UTILITY] key (but excluding the [MUTE] key) will

light up (User Lock On) or flash (User Lock Off), indicat-

ing which keys are locked.

4.

Press the desired front panel keys (in the range

from the [LEVEL] keys to the [UTILITY] key) to

turn User Lock on or off for the corresponding

parameter setting.

5.

Press the [BACK] key twice to return to the User

Lock page.

SP2060 V1.3 Supplemental Manual

NOTE

• You can mute or unmute, or cancel User Lock even if the User

Lock function is turned on.

• The User Lock function is effective only for the panel controls on

the SP2060, and does not affect any control signals from the

DME Designer or other external devices.

Primary modifications

User Lock

(page 34 in the Owner’s Manual)