Yamaha SRT-700 Owners Manual - Page 13

Playing back audio from a Bluetooth device on the unit 1 With the unit turned on, press the BLUETOOTH key on the unit's remote control to select Bluetooth as the input source. The BLUETOOTH indicator on the front panel flashes. Flashes 2 Turn on the Bluetooth function of the device and then connect. When Bluetooth connection is made correctly, the BLUETOOTH indicator of the unit lights up. Lights up 3 Play back a song on the device. NOTE • Perform Bluetooth connection with the device and unit within 10 meters (33 ft) of each other. • It may be necessary to select "SRT-700 Yamaha" in the Bluetooth device list again, in the event that a connection problem occurs. You may have to change the output setting to output audio to the unit, depending on the Bluetooth device you are using. • Adjust the volume level of the Bluetooth device as required. • If a Bluetooth device is already connected to the unit, terminate that Bluetooth connection, then connect with the new device. Terminating Bluetooth connection Bluetooth connection is terminated in the following cases. When the Bluetooth connection is terminated with the unit turned on, the BLUETOOTH indicator changes from the lit status to the flashing status and the unit enters the connection wait status. • The Bluetooth function is turned off on the compatible device. • The BLUETOOTH key on the unit's remote control is pressed for more than 3 seconds. • The unit is turned off. Using the Bluetooth standby mode The Bluetooth standby mode allows you to turn on (or off) the unit automatically, linked with the operation of the Bluetooth device. 1 With the unit turned on, hold down the BLUETOOTH STANDBY key on the unit's remote control for more than 3 seconds. Holding down the BLUETOOTH STANDBY key for 3 seconds each time toggles the mode between enabled and disabled. Flash 3 times (enabled), flash once (disabled) When the Bluetooth standby mode is enabled and the unit is turned off, the D indicator lights up in red (Bluetooth standby). Lights up (red) Functions available on Bluetooth devices with Bluetooth standby mode enabled Power on interlock function (when the unit is turned off) When Bluetooth connection is made on the device, the unit will turn on and will be ready to play back sound from the device. Power off interlock function (when the unit is turned on) The unit will be turned off when Bluetooth connection is terminated on a Bluetooth device. (Only when BLUETOOTH is selected as the input source.) Using the HOME THEATER CONTROLLER application By installing the dedicated free application "HOME THEATER CONTROLLER" to a Bluetooth device, such as a smartphone, you can perform various operations easily and conveniently with the Bluetooth device. (Setting items: basic operation, surround mode, sound adjustments) NOTE • To use the application, connect the unit and a Bluetooth device via Bluetooth connection. • If you enable the Bluetooth standby mode of the unit, you can turn on the power of the unit with the Bluetooth device. For details on "HOME THEATER CONTROLLER", see the product information on our website. En 11