Yamaha SRT-700 Owners Manual - Page 15

5 Teach the unit the "Volume (-)" code of the TV's remote control. 5-1 Press VOLUME (-) on the front panel of the unit. 7 Teach the unit the "Power" code of the TV's remote control. 7-1 Press (power) on the front panel of the unit. 5-2 While pointing your TV's remote control at the remote control sensor, hold down the volume (-) key for more than 1 second twice or three times. Result Bleep/buzzer Indicators Successfully learned Once Lights up Failed to learn * Repeat from Twice Step 5-1. Flash 6 Teach the unit the "Volume (+)" code of the TV's remote control. 6-1 Press VOLUME (+) on the front panel of the unit. 6-2 While pointing your TV's remote control at the remote control sensor, hold down the volume (+) key for more than 1 second twice or three times. Result Bleep/buzzer Indicators Successfully learned Once Lights up Failed to learn * Repeat from Twice Step 6-1. Flash 7-2 While pointing your TV's remote control at the remote control sensor, hold down the power key for more than 1 second twice or three times. Result Bleep/buzzer Indicators Successfully learned Once Lights up Failed to learn * Repeat from Twice Step 7-1. Flash 8 To finish the learning mode, press the LEARN key on the unit's remote control. This completes the necessary settings. Now you can operate the unit with the TV's remote control's mute key, volume keys, or power key. HINT • The learning mode will be finished automatically if no operations are performed for 5 minutes. • Set the TV volume to minimum. When you turn up the volume of the unit with the TV's remote control, the volume of the TV may be turned up at the same time. In this case, follow Step 3 in "Connections" (p.6) to change the TV setting. • You can press the (power) key on the unit's remote control to finish learning mode. For cable or satellite set top box users: Once you have completed the setting with the original TV's remote control, you can use the cable or satellite set top box's remote control to operate the unit. En 13