Yamaha System Owner's Manual - Page 2
Part 2 : Removing the old strings
 |
View all Yamaha System manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
English Part 2 : Removing the old strings 1 Loosen the locking lever of the FC (FingerClamp) nut. (Fig. ) Loosen the locking nut 4 Remove the old strings from the body back. (Fig. ) * It is not needed to detach the back cover to remove the strings. Pull off old strings Locking Lever Loosen 2 Pull up the locking levers of the FC tremolo. (Fig. ) Pull up the locking lever Locking Lever 3 Loosen the tuning machines to remove the old strings from the tuning machines in the standard manner. (Fig. ) Remove old strings * The "Tremolo Unit Holder" prevents the tremolo unit from sinking into the tremolo cavity. * If the tremolo arm slides away from the arm base, tighten the screw on the side of the arm base. (Fig. ) 2
-
1 -
2 -
3 -
4
 |
 |
2
Part 2 : Removing the old strings
1
Loosen the locking lever of the FC (FingerClamp) nut.
(Fig.
)
2
Pull up the locking levers of the FC tremolo.
(Fig.
)
3
Loosen the tuning machines to remove the old strings from the
tuning machines in the standard manner.
(Fig.
)
4
Remove the old strings from the body back.
(Fig.
)
*
It is not needed to detach the back cover to remove the
strings.
Locking Lever
English
Locking Lever
Loosen
Loosen the locking nut
Pull up the locking lever
Remove old strings
Pull off old strings
*
The “Tremolo Unit Holder” prevents the tremolo unit from
sinking into the tremolo cavity.
*
If the tremolo arm slides away from the arm base, tighten
the screw on the side of the arm base. (Fig.
)