Yamaha TSX-140 Owners Manual - Page 19
USB device playback, Radio reception, Remote control, Too much noise during
UPC - 027108937908
View all Yamaha TSX-140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
English USB device playback Problem MP3/WMA file in the USB device does not play. Cause The USB device is not recognized. Flashing USB indicator twice An incompatible USB device is is repeated 3 times after connected to the unit. connecting a USB device. The USB device does not contain playable files. "Err" is displayed in the front An incompatible USB device is panel display after connected to the unit. connecting a USB device. An overcurrent is detected. TROUBLESHOOTING Solution Turn off the system and reconnect the USB device to the unit. Connect an AC adapter if supplied with the device. If the solutions above do not resolve the problem, the USB device is not playable on the unit. Turn off the system and reconnect the USB device to the unit. If it does not resolve the problem, the USB device is not playable on the unit. Use a USB device contains playable files (☞ P. 16). Turn off the system and reconnect the USB device to the unit. If it does not resolve the problem, the USB device is not playable on the unit. Radio reception Problem Cause Solution Too much noise during stereo broadcast. The antenna may be connected improperly. Make sure the antenna is connected properly (☞ P. 4). The radio station you selected may be far Try manual tuning to improve the signal from your area, or the radio wave quality (☞ P. 8) or use a multi-channel reception is weak in your area. outdoor antenna. Even with an outdoor antenna, radio wave reception is weak. (Sound is distorted.) Multipath reflection or other radio interferences may have occurred. Change the height, direction, or placement of the antenna. Remote control Problem Cause Solution The remote control does not The remote control may be operated work properly. outside its operation range. For information on the remote control operation range, refer to "Using the remote control" (☞ P. 1). The remote control sensor on the unit may be exposed to direct sunlight or lighting (inverted fluorescent lamps). Change the lighting or orientation of the unit. The battery may be worn out. Replace the battery with a new one. There are obstacles between the sensor of Remove the obstacles. the unit and the remote control. 15 En