Yamaha TSX-140 Owners Manual - Page 8
Rear panel Connecting antenna, Connecting an indoor FM antenna to the GND terminal
UPC - 027108937908
View all Yamaha TSX-140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
NAMES OF PARTS AND THEIR FUNCTIONS X Rear panel (Connecting antenna) Notes • The antenna should be stretched out. • If you use an outdoor antenna instead of the supplied antenna, reception will be better. • If radio reception is poor, change the height, direction, or placement of the antenna. 1 FM antenna terminal: Connect the supplied indoor FM antenna. 2 AM antenna terminal: Connect the supplied AM loop antenna. 3 GND: Connect the cable core of the Indoor FM antenna (see below). 4 AUX: Connect an external device. (☞ P. 8) 5 USB FOR SYNC.: Connect to PC. (☞ P. 6) 6 15V : Connect supplied AC adaptor and power cable. 7 CLOCK: Adjust the clock. (☞ P. 5) 8 ALARM TYPE: Set alarm type of IntelliAlarm function. (☞ P. 9) 9 Indoor FM antenna (supplied) Connecting an indoor FM antenna to the GND terminal It is recommended to connect the indoor FM antenna to the GND terminal before connecting to the FM antenna terminal. Ring 1 2 3 4 1 Remove insulation and twist the edge of the cord. 2 Fully screw down the GND terminal. 3 Wind the cord around the GND terminal. Make sure the cord is wound inside of the ring part. Assembling AM loop antenna 4 Tighten the GND terminal taking care not to slip the cord off from the terminal. 4 En