Yamaha YAS-101 Owners Manual - Page 7
Placing, Attaching the unit to a wall - wall mount
View all Yamaha YAS-101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
English Placing Installation: illustrated examples Example 1 Example 2 Example 3 1 Attach the supplied mounting template on a wall and mark the holes of the mounting template. Tapes or thumbtacks Mark Example 1: Unit beneath TV Example 2: Unit without stand beneath TV (☞ P. 9) Example 3: Wall mounting Notes • Do not place the unit on/under any other components such as BD player in a pile. The vibration of the unit may cause system failure, etc. in other components. • Depending on your installation environment, connections to external components such as TV or BD player can be done before installing the unit. We recommend that you temporarily place and arrange all components in order to decide which procedure is best done first. • When you clean the unit, use a clean, dry and soft cloth (such as cloth for glasses). • Do not touch the grille on the front and bottom of the unit. • Place the unit away from your TV more than 50 mm (2") so as not to damage your TV with rear panel of the unit. The brackets on the rear of the unit are removable. 2 Remove the mounting template and then install the commercially available screws and the supplied spacers at the marks. Spacer (5 mm (1/4")) 7 to 9 mm (1/4" to 3/8") 4 mm (#8) Minimum 2 to 4 mm 20 mm (3/4") (1/16" to 3/16") 3 Hang the unit on the screws using the brackets on the rear of the unit. Attaching the unit to a wall You can attach the unit to a wall using the brackets on the rear of the unit. When installing the unit on a wall, all installation work must be performed by a qualified contractor or dealer. The customer must never attempt to perform this installation work. Improper or inadequate installation could cause the unit to fall, resulting in personal injury. Notes • Do not attach the unit to a wall that is made of weak materials such as plaster or veneered woods. Doing so may cause the unit to fall. • Use commercially available screws that can support the weight of the installation. • Make sure you use specified screws to attach the unit. Using clamps other than specified screws, such as short screws, nails, or two-sided tape, may cause the unit to fall. • When connecting the unit, fix the cables in place where they will not become loose. If your foot or hand accidentally gets caught on a loose cable, the unit may fall. • After attaching the unit, check that the unit is fixed securely. Yamaha will bear no responsibility for any accidents caused by improper installations. 3 En