Yamaha YAS-70CU Owners Manual - Page 27

Adjusting the virtual speaker settings Using the speaker test mode Use this feature to adjust the volume balance of each (virtual) speaker and the position of the virtual surround speakers. ■ Adjusting the volume balance of each channel 1 Press TEST to activate the speaker test mode. Following message appears in the front panel display and this system outputs the test tones. TEST FL 0dB Active (virtual) speaker channel Volume balance Test tone is output at each (virtual) speaker for about 2.5 seconds in the following order. 1: Front left (FL) 6: Subwoofer (SW) 2: Virtual center (C) 3: Front right (FR) 5: Virtual surround left (SL) US INPUT 3 INPUT 2 1 INPUT FM OCK VOLUME MUTE A-E 2 MENU A-E PR/ETSUENTE ENTER MEMORY SW AU/MTAON'L DISP. MODE NIGHT DEC. MODE CENTER DIMMER ROOM EQ R L SUR. TEST 4: Virtual surround right (SR) 2 Press S/T repeatedly to adjust the output level of the currently selected (virtual) speaker channel. The adjustable range for the output level of each speaker channel is as follows: Front left/right (FL/FR): -6 to 0 dB Center (C): -4 to +4 dB Surround left/right (SL/SR): -4 to +4 dB Subwoofer (SW): -8 to +8 dB 1,3 3 Press TEST again to exit from the speaker test mode. y • To reset the volume level and the beam angle (see page 24) of all virtual speaker channels to the factory settings, press INPUT on the front panel while a test tone is output. • You can adjust overall the volume level of the test tone using VOLUME +/-. ADVANCED OPERATION English 23 En