Yamaha YDP-162 Owner's Manual - Page 25
Changing the Initial Settings of the Recorded Song, Deleting Recorded Data - midi
View all Yamaha YDP-162 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
ENGLISH 5 If desired, record the other Part by repeating Steps 1-4. 6 To hear the recorded Song, press [PLAY] to start playback. Press [PLAY] again to stop playback. Advanced Operations NOTE The recorded Song data can be saved to computer as a Standard MIDI file (SMF). For details, refer to the Computerrelated Operations manual (page 7). Changing the Initial Settings of the Recorded Song The settings of the following parameters can be changed after the Record operation is completed. - For individual Parts: Voice, Dual Voices, Reverb Depth - For the entire Song: Tempo, Reverb Type 1 Make the settings of the above parameters. 2 While holding down [REC], press the desired Part button to engage Record Ready mode. In this status, do not press [PLAY] again or any key. Otherwise, the originally recorded performance data will be deleted. 3 Press [REC]+[PLAY] again to exit from Record Ready mode. Deleting Recorded Data To delete the entire Song: 1 While holding down [REC], press [DEMO/SONG]. The [+R] and [-L] lamps flash. To exit from this status, press [-L]. 2 Press [+R] to delete the data of the entire Song. The [REC], [PLAY], [+R] and [-L] lamps flash. After the operation is completed, all lamps turn off. To delete a specific Part: 1 While holding down [REC], press [+R] or [-L] (depending on the Part you want to delete) to engage Record Ready mode. The [REC] and the selected Part ([+R] or [-L]) lamps flash. 2 Press [PLAY] to start recording without playing the keyboard. The selected Part ([+R] or [-L]) lamp flashes. 3 Press [REC] or [PLAY] to stop recording. All data recorded for the selected Part will be deleted, and the lamp turns off. YDP-162/142 Owner's Manual 25