Yamaha YDP-C71 Owner's Manual - Page 26

Advanced Functions ENGLISH MIDI Functions E2 C1 D2 Turning the Program Change On/Off Turning the Local (C 6) Control On/Off Turning the Control (C6) Change On/Off C4 E5 F5 (D6) Lowest key 2 4 7 9 11 14 16 1 3 5 6 8 10 12 13 15 Setting the Transmit Channel Off (C1-D 2) 2 4 7 9 11 14 16 1 3 5 6 8 10 12 13 15 1+2 Setting the Receive Channel All (C4-F5) Highest key MIDI Transmit/Receive Channel When connecting MIDI instruments, make sure to match the MIDI channels on the instruments. If the Receive Channel is set to "4" on the external MIDI instrument, for example, you should set the Transmit Channel of this instrument to "4." To set the Transmit Channel: While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously, press one of the C1-E2 keys. To set the Receive Channel: While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously, press one of the C4-F5 keys. NOTE Default settings: • Transmit Channel Voice 1: Ch1 • Receive Channel All (Ch1 - Ch16; all channels) About the value • When the Transmit Channel is set to off, no MIDI data is transmitted even if you play the keyboard. • When the Receive Channel is set to all, this instrument receives MIDI data over all channels, such as with multi-channel SMF data. • When the Receive Channel is set to 1+2, this instrument receives MIDI data over channels 1 and 2, such as with Piano Song data. Transmit Channel in Dual While the Voice 1 Part is transmitted over the specified Channel, the Voice 2 Part is transmitted over the next highest Channel. Local Control On/Off Normally, playing the keyboard will control the internal tone generator. This situation is "Local Control On." If you want to use the keyboard only for controlling an external MIDI instrument, turn off Local Control. With this setting, no sound of this instrument will be produced even if you play the keyboard. To turn the Local Control On or Off: While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously, press the C6 key once to change the setting. Program Change On/Off Normally on this instrument, selecting a Voice on the panel transmits the corresponding Program Change over the specified Transmit Channel. Likewise, receiving a Program Change message changes the Voice number according to the Receive Channel setting, without affecting the panel settings. This status can be changed via the following operation. To turn Program Change On or Off While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously, press the C#6 key once to change the setting. NOTE For information on the Program Change number for each Voice, refer to the "MIDI Reference." Control Change On/Off Normally on this instrument, pressing a Pedal or setting the Reverb Depth transmits the corresponding Control Change over the specified Transmit Channel. Likewise, receiving the Control Change message will affect the performance expression according to the Receive Channel setting, without affecting the panel settings. This status can be changed via the following operation. To turn Control Change On or Off While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously, press the D6 key repeatedly. NOTE For information on the Control Change messages which can be handled in this instrument, refer to the "MIDI Reference." 26 YDP-C71 Owner's Manual