Yamaha YDP131C Owner's Manual - Page 36
After completing the assembly, please, check the following - review
View all Yamaha YDP131C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
7. Connect the AC power adaptor. 8. Set the adjuster. Rotate the adjuster until it comes in firm contact with the floor surface. ENGLISH WARNING Use the specified adaptor (PA-5D or an equivalent recommended by Yamaha) only. After completing the assembly, please check the following. • Are there any parts left over? ➝ Review the assembly procedure and correct any errors. • Is this instrument clear of doors and other mov- able fixtures? ➝ Move the instrument to an appropriate location. • Does this instrument make a rattling noise when you shake it? ➝ Tighten all screws. • Does the pedal box rattle or give way when you step on the pedals? ➝ Turn the adjuster so that it is set firmly against the floor. • Are the pedal cord and adaptor plug inserted securely into the sockets? ➝ Check the connection. • If the main unit creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly diagrams and retighten all screws. When moving the instrument after assembly, always hold the bottom of the main unit. CAUTION Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury. Key cover Top portion Do not Hold here. hold here. Do not hold here. 36 YDP-131/YDP-213 Keyboard Stand Assembly 34