Yamaha YHT-16 Quick Connection Guide - Page 7
Onnecting, Hannel, Ecoder
View all Yamaha YHT-16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
YHT-16 QUICK-C ON N ECT GUIDE CONNECTING A 5.1-CHANNEL DECODER If you own a 5.1-channel decoder (or a unit which incorporates a 5.1-channel decoder), you can connect its discrete outputs to the R-V703 as shown below. • To hear playback of a stereo or mono audio source or one encoded with Dolby Pro Logic Surround*, connect the unit (e.g., DVD player) to the DVD/LD (or TV/DBS) AUDIO SIGNAL input terminals. • The discrete signals feeding to the R-V703 cannot be recorded by a tape deck, MD recorder, or VCR. To record programs from a source (e.g., laserdisc player), connect the source unit to the DVD/LD (or TV/DBS) AUDIO SIGNAL input terminals. • If your audio system does not include a subwoofer (i.e., SUBWOOFER input terminals are not used), set signal routing on the 5.1- Channel Decoder so that the LFE channel feeds both LEFT and RIGHT MAIN output terminals. For details, refer to the owner's manual for your 5.1-Channel Decoder unit. Yamaha R-V703 Receiver Rear Panel RCA Cable Color Codes Yellow = Video White = Left Audio Red = Right Audio DVD/LD TV/DBS RL MAIN RL SUR 6CH DISCRETE C SUB INPUT R Main Out L Main Out R Sur Out L Sur Out Center Out Sub Out DVD/LD V L R DVD Player Video Out Audio L Out Audio R Out 5.1-Channel Decoder Digital Audio Cable (Optical or Coaxial) Use an RCA Video Cable And Jacks For Video Interconnections *Dolby Pro Logic Surround is a trademark of Dolby Laboratories Licensing Corp. 5