Zanussi ZWG6161P Product Manaul - Page 6

Installation

Page 6 highlights

Electrical connection Voltage - Overall power - Fuse Water supply pressure Maximum Load Spin Speed Information on the electrical connection is given on the rating plate, on the inner edge of the appliance door. Minimum Maximum 0,05 MPa 0,8 MPa Cotton 6 kg Maximum 1600 rpm Installation Unpacking Warning! • Read carefully the "Safety information" chapter before installing the appliance. x 3 A B x3 x 1 C x 2 Warning! Remove and keep all transit devices so that they can be refitted if the appliance ever has to be transported again. Necessary tools 10 mm 30 mm • Remove the cardboard top. • Remove the polystyrene packaging materials. • Spread the front piece 1 on the floor behind the appliance and then lay the appliance carefully rear side down on it. Make sure that no ho- 2 ses are crushed in the process. • Remove the polystyrene base from the bottom. • Return appliance to it's upright position. • Remove the external film. Use a cutter, if necessary. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

Electrical connection
Voltage - Overall power - Fuse
Information on the electrical connection is given on the rating plate, on the
inner edge of the appliance door.
Water supply pressure
Minimum
Maximum
0,05 MPa
0,8 MPa
Maximum Load
Cotton
6 kg
Spin Speed
Maximum
1600 rpm
Installation
Unpacking
Warning!
Read carefully the "Safety information" chapter
before installing the appliance.
x 3
x 3
x 2
x 1
B
A
C
Warning! Remove
and
keep all transit devices
so
that they can be refitted if the appliance ever has
to be transported again.
Necessary tools
10 mm
30 mm
Remove the external
film. Use a cutter, if
necessary.
Remove the cardboard top.
Remove the polystyrene packaging materials.
2
1
Spread the front piece
on the floor behind the
appliance and then lay
the appliance carefully
rear side down on it.
Make sure that no ho-
ses are crushed in the
process.
Remove the polystyrene base from the bottom.
Return appliance to it's
upright position.
6