Zanussi ZWG6161P Product Manaul - Page 7
Unscrew the three bolts - instructions
 |
View all Zanussi ZWG6161P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
• Open the door and remove the plastic hose guide, the bag containing the instruction booklet and the plastic plug caps from the drum. Warning! Do not remove the drain hose from the rear support. Remove this hose only if it is necessary to drain the water. Refer to "Frost precaution" and "What to do if". • Remove the power supply cable and the draining and inlet hose from the hose holders (C) on the rear of the appliance. • Unscrew the three bolts (A) and remove the hose holders (C). • Slide out the relevant plastic spacers (B). • Plug the smaller upper hole and the two large ones with the corresponding plastic plug caps. 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
•
Open the door and re-
move the plastic hose
guide, the bag contain-
ing the instruction
booklet and the plastic
plug caps from the
drum.
•
Remove the power supply cable and the draining and
inlet hose from the hose holders (
C
) on the rear of
the appliance.
•
Unscrew the three bolts (
A
) and remove the hose
holders (
C
).
•
Slide out the relevant plastic spacers (
B
).
Warning! Do not re-
move the drain hose
from the rear support. Re-
move this hose only if it is
necessary to drain the wa-
ter. Refer to "Frost precau-
tion" and "What to do if".
•
Plug the smaller upper hole and the two large ones
with the corresponding plastic plug caps.
7