ZyXEL AG-225H User Guide - Page 55
Table 14
View all ZyXEL AG-225H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Figure 38 Station Mode: Adapter ZyXEL AG-225H v2 User's Guide The following table describes the labels in this screen. Table 14 Station Mode: Adapter LABEL Adapter Setting Transfer Rate Preamble Type Power Saving Mode Save DESCRIPTION In most networking scenarios, the factory default Auto setting is the most efficient and allows your AG-225H v2 to operate at the highest possible transmission (data) rate. If you want to select a specific transmission rate, select one that the AP or peer wireless device supports. Note: With USB1.0/1.1, the AG-225H v2 can only transmit at up to 11Mbps. Preamble is used to signal that data is coming to the receiver. Select the preamble type that the AP uses. Short and Long refer to the length of the synchronization field in a packet. Short preamble increases performance as less time sending preamble means more time for sending data. All IEEE 802.11b/g compliant wireless adapters support Long preamble, but not all support short preamble. Select Auto to have the AG-225H v2 automatically use short preamble when all access point or wireless stations support it; otherwise the AG-225H v2 uses long preamble. Note: The AG-225H v2 and the access point or wireless stations MUST use the same preamble mode in order to communicate. Select Maximum Power Save or Fast Power Save to save power (especially for notebook computers). This forces the AG-225H v2 to go to sleep mode when it is not transmitting data. When you select Continuous Access Mode, the AG-225H v2 will never go to sleep mode. Click Save to save the changes to the AG-225H v2. Chapter 4 Wireless Station Mode Configuration 55