ZyXEL B-500 User Guide - Page 79
Table 6-8 Wireless: 802.1x + No WEP
View all ZyXEL B-500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
ZyAIR B-500 Wireless Access Point User's Guide LABEL ReAuthentication Timer (in Seconds) Idle Timeout (in Seconds) Authentication Databases Table 6-8 Wireless: 802.1x + No WEP DESCRIPTION Specify how often wireless stations have to reenter usernames and passwords in order to stay connected. This field is activated only when you select Authentication Required in the Wireless Port Control field. Enter a time interval between 10 and 9999 seconds. The default time interval is 1800 seconds (30 minutes). If wireless station authentication is done using a RADIUS server, the reauthentication timer on the RADIUS server has priority. The ZyAIR automatically disconnects a wireless station from the wired network after a period of inactivity. The wireless station needs to enter the username and password again before access to the wired network is allowed. This field is activated only when you select Authentication Required in the Wireless Port Control field. The default time interval is 3600 seconds (1 hour). This field is activated only when you select Authentication Required in the Wireless Port Control field. The authentication database contains wireless station login information. The local user database is the built-in database on the ZyAIR. The RADIUS is an external server. Use this drop-down list box to select which database the ZyAIR should use (first) to authenticate a wireless station. Before you specify the priority, make sure you have set up the corresponding database correctly first. Select Local User Database Only to have the ZyAIR just check the built-in user database on the ZyAIR for a wireless station's username and password. Select RADIUS Only to have the ZyAIR just check the user database on the specified RADIUS server for a wireless station's username and password. Select Local first, then RADIUS to have the ZyAIR first check the user database on the ZyAIR for a wireless station's username and password. If the user name is not found, the ZyAIR then checks the user database on the specified RADIUS server. Select RADIUS first, then Local to have the ZyAIR first check the user database on the specified RADIUS server for a wireless station's username and password. If the ZyAIR cannot reach the RADIUS server, the ZyAIR then checks the local user database on the ZyAIR. When the user name is not found or password does not match in the RADIUS server, the ZyAIR will not check the local user database and the authentication fails. Wireless Security 6-21