ZyXEL EMG2306 User Guide - Page 85

Table 31, Label, Description

Page 85 highlights

Chapter 9 Wireless LAN Note: With WPS, wireless clients can only connect to the wireless network using the first SSID on the EMG2306-R10A. Figure 41 Configuration > Network > Wireless LAN > WPS The following table describes the labels in this screen. Table 31 Configuration > Network > Wireless LAN > WPS LABEL WPS Setup Enable WPS PIN Code PIN Number WPS Status Status DESCRIPTION Select this to enable the WPS feature. Select this to enable PIN code. This displays a PIN number last time system generated. Click Generate to generate a new PIN number. This displays Configured when the EMG2306-R10A has connected to a wireless network using WPS or when Enable WPS is selected and wireless or wireless security settings have been changed. The current wireless and wireless security settings also appear in the screen. 802.11 Mode SSID Security Apply Cancel This displays Unconfigured if WPS is disabled and there are no wireless or wireless security changes on the EMG2306-R10A or you click Release_Configuration to remove the configured wireless and wireless security settings. This is the 802.11 mode used. Only compliant WLAN devices can associate with the EMG2306-R10A. This is the name of the wireless network (the EMG2306-R10A's first SSID). This is the type of wireless security employed by the network. Click Apply to save your changes back to the EMG2306-R10A. Click Cancel to exit this screen without saving. EMG2306-R10A User's Guide 85

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232

Chapter 9 Wireless LAN
EMG2306-R10A User’s Guide
85
Note: With WPS, wireless clients can only connect to the wireless network using the first
SSID on the EMG2306-R10A.
Figure 41
Configuration > Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 31
Configuration > Network > Wireless LAN > WPS
LABEL
DESCRIPTION
WPS Setup
Enable WPS
Select this to enable the WPS feature.
PIN Code
Select this to enable PIN code.
PIN Number
This displays a PIN number last time system generated. Click
Generate
to generate a
new PIN number.
WPS Status
Status
This displays
Configured
when the EMG2306-R10A has connected to a wireless
network using WPS or when
Enable WPS
is selected and wireless or wireless security
settings have been changed. The current wireless and wireless security settings also
appear in the screen.
This displays
Unconfigured
if WPS is disabled and there are no wireless or wireless
security changes on the EMG2306-R10A or you click
Release_Configuration
to
remove the configured wireless and wireless security settings.
802.11 Mode
This is the 802.11 mode used. Only compliant WLAN devices can associate with the
EMG2306-R10A.
SSID
This is the name of the wireless network (the EMG2306-R10A’s first SSID).
Security
This is the type of wireless security employed by the network.
Apply
Click
Apply
to save your changes back to the EMG2306-R10A.
Cancel
Click
Cancel
to exit this screen without saving.