ZyXEL EOC350-TS User Guide

ZyXEL EOC350-TS Manual

Get ZyXEL EOC350-TS PDF manuals and user guides View all ZyXEL EOC350-TS manuals
Add to My Manuals
Save this manual to your list of manuals

ZyXEL EOC350-TS manual content summary:

  • ZyXEL EOC350-TS | User Guide - Page 1
    EOC350 Series Ethernet over Coax Termination System and Terminal Adapter Version 1.00 Edition 1, 08/2012 Quick Start Guide User's Guide Default Login Details LAN IP Address User Name Passwordwww.zyxel.com 192.168.1.1 admin 1234 Copyright © 2012 ZyXEL Communications Corporation
  • ZyXEL EOC350-TS | User Guide - Page 2
    CAREFULLY BEFORE USE. KEEP THIS GUIDE FOR FUTURE REFERENCE. Related Documentation • Quick Start Guide The Quick Start Guide shows how to connect the EOC350-TS and EOC350-TA. Note: It is recommended you use the Web Configurator to configure the EOC350-TS and EOC350-TA. 2 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 3
    Setup ...19 Auto Configuration ...21 EP Management ...22 Administration ...45 System Log ...51 System Time ...53 Static MAC ...55 Maintenance ...56 Telnet ...61 SNMP ...71 Troubleshooting ...73 EOC350 Series User's Guide 3
  • ZyXEL EOC350-TS | User Guide - Page 4
    Configurator ...15 2.1 Overview ...15 2.1.1 Accessing the Web Configurator 15 2.2 Securing the EOC350-TS ...16 2.3 The Web Configurator Layout ...17 2.3.1 Navigation Panel ...17 2.3.2 Auto Configuration Screen ...21 Chapter 5 EP Management ...22 5.1 Overview ...22 4 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 5
    Allowed Source Screen ...46 6.4 The Telnet Setup Screen ...47 6.5 The HTTP Setup Screen ...48 6.6 The SNMP Setup Screen ...49 6.7 The SNMP Trap Server Screen ...49 EOC350 Series User's Guide 5
  • ZyXEL EOC350-TS | User Guide - Page 6
    Overview ...61 11.2 Config Telnet Server ...61 11.2.1 Command Format ...61 11.2.2 Generic Command Sets ...62 Chapter 12 SNMP ...71 12.1 Overview ...71 Chapter 13 Troubleshooting...73 13.1 Power, Hardware Connections, and LEDs 73 13.2 EOC350-TS Access and Login ...74 6 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 7
    Table of Contents 13.3 Bandwidth and Connectivity ...75 13.4 Resetting the EOC350-TS to Factory Defaults 76 Appendix A Legal Information...79 EOC350 Series User's Guide 7
  • ZyXEL EOC350-TS | User Guide - Page 8
    Table of Contents 8 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 9
    is sent through the coaxial cable connected to the OUT socket. The EOC350-TA takes the combined signal from its IN socket, separates the satellite TV signal and sends it to it's OUT socket for the TV. Figure 1 Integrating the EOC350-TS and EOC350-TA with Satellite TV EOC350 Series User's Guide 9
  • ZyXEL EOC350-TS | User Guide - Page 10
    -TA directly for test purpose, please add an attenuator that exceeds 15dB to the coaxial cable. 1.2 EOC350-TS The EOC350-TS is an Ethernet over Coax Termination System. The EOC350-TS combines TV and Ethernet media on to a coaxial cable for distribution to EOC350-TAs. 10 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 11
    the EOC350-TS is not receiving power. 1.2.2 Connections Figure 3 EOC350-TS Connections Power LAN 1 LAN 2 Link/Act Quality Diagnosis 1P2OV WDECR LINE 12PVODWCE-RIN 12VPDOCW-EORUT 2 RESET 1 OUT IN Power Switch Power Out Reset Power In Ethernet Ports OUT IN EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 12
    EOC350-TS EOC350-TA LEDs LED DESCRIPTION QLTY This LED shows the Ethernet over Coaxial cable speed. Green is high, orange is medium and red is low. PWR This LED is on when the power is on. Note: None of the LEDs are on if the EOC350-TA is not receiving power. 12 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 13
    IN 1 2 OUT Power In IN Ethernet Ports The following table describes the connections. Table 4 EOC350-TA Connections ITEM DESCRIPTION IN Connect this port to an existing coaxial cable outlet in the room default settings, press the RESET button for 5 seconds. EOC350 Series User's Guide 13
  • ZyXEL EOC350-TS | User Guide - Page 14
    (supported) web browser. • Command Line Interface. Line commands offer an alternative to the web configurator and in some cases are necessary to configure advanced features. See Chapter 11 Telnet. • SNMP. The EOC350-TS can be monitored by an SNMP manager. See Chapter 12 SNMP. 14 EOC350 Series User
  • ZyXEL EOC350-TS | User Guide - Page 15
    and click Login. Figure 5 Password Screen Note: For security reasons, the EOC350-TS automatically logs you out if you do not use the web configurator for five minutes (default). If this happens, log in again. The System Info screen appears after a successful login. EOC350 Series User's Guide 15
  • ZyXEL EOC350-TS | User Guide - Page 16
    even crashes. If you forget your password, you will have to reset the EOC350-TS to its factory default settings. If you backed up an earlier configuration file, you would not have to totally re-configure the EOC350TS. You could simply restore your last configuration. 16 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 17
    screen is divided into these parts: • A - navigation panel • B - main window 2.3.1 Navigation Panel Use the menu items on the navigation panel to open screens to configure EOC350-TS features. EOC350 Series User's Guide 17
  • ZyXEL EOC350-TS | User Guide - Page 18
    menu to configure the IP and DHCP Snooping parameters of the Ethernet interface facing the Internet Service Provider (ISP). Auto Configuration Use this menu to setup automatic retrieval and distribution of (*.shc login, the main window shows the System Info screen. 18 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 19
    Service EOC350-TS automatically computes the subnet mask based on the IP address you enter, so do not change this field unless you are instructed to do so. Default Gateway Enter the IP address of the default gateway in dotted decimal notation, for example 192.168.1.254. EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 20
    DHCP Option 82 and IP Source Guard Apply Enter the IP address of the second DNS server the EOC350-TS checks to resolve IP addresses. Select Disable to pass DHCP traffic without modification. Select DHCP Option by DHCP servers. Click Apply to save your settings. 20 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 21
    are stored. Click Enable to make the termination system automatically upgrade the termination adapter's Ethernet over Coax (EoC) driver. Click Apply to save your settings. EOC350 Series User's Guide 21
  • ZyXEL EOC350-TS | User Guide - Page 22
    . Figure 10 EP Management A B C The screen is divided into these regions: • A - local termination system device configuration • B - default profile configuration for termination adapters • C - termination adapter configuration EOC350 Series User's Guide 22
  • ZyXEL EOC350-TS | User Guide - Page 23
    This shows the index of the row. Sel This shows which termination adapters are selected for manual upgrade or reconfiguration. Click Sel to select all termination adapters. Link This shows which the current EP Management > View Host to show the following screen. EOC350 Series User's Guide 23
  • ZyXEL EOC350-TS | User Guide - Page 24
    Group This is the IP address of the multicast group. Host This is the IP address of the host member of the multicast group. 24 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 25
    throttle the bandwidth of the termination system's interfaces. Click EP Management > Ether > Config > Port on the local termination system device to show the following screen. EOC350 Series User's Guide 25
  • ZyXEL EOC350-TS | User Guide - Page 26
    connection speed and duplex mode that both ends support. If the peer port does not support auto negotiation or turns off this feature, the EOC350-TS determines the connection speed by detecting the on the local termination system device to show the following screen. 26 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 27
    EP Management > Ether > Config > IGMP on the local termination system device to show the following screen. Figure 16 EP Management > Ether > Config > IGMP (termination system) EOC350 Series User's Guide 27
  • ZyXEL EOC350-TS | User Guide - Page 28
    . Select Bypass to leave the tag of the frame alone. Click Apply to save your settings. Click Back to return to the previous screen. 28 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 29
    these steps to measure the noise spectrum at the termination system's coax interface. 1 Click EP Management > Test in the termination system region of the screen. EOC350 Series User's Guide 29
  • ZyXEL EOC350-TS | User Guide - Page 30
    5 EP Management Figure 19 Management > Test (termination system) 2 Click Noise. The EOC350-TS measures the noise spectrum and shows the following screen. Figure 20 Management > Test Management > Ether > Config on the default profile to show the following screen. 30 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 31
    > Config > Port (profile) The following table describes the items in this screen. Table 19 EP Management > Ether > Config > Port (profile) LABEL DESCRIPTION Port Service This shows the port name for this row. Select On to enable this port or Off to disable it. EOC350 Series User's Guide 31
  • ZyXEL EOC350-TS | User Guide - Page 32
    connection speed and duplex mode that both ends support. If the peer port does not support auto negotiation or turns off this feature, the EOC350-TA determines the connection speed by detecting following screen. Figure 23 EP Management > Ether > Config > QoS (profile) 32 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 33
    termination adapter's interfaces. Click EP Management > Ether > Config > VLAN on the default profile and then select Enable from Tag VLAN to show the following screen. EOC350 Series User's Guide 33
  • ZyXEL EOC350-TS | User Guide - Page 34
    's interfaces. Click EP Management > Ether > Config > Filter on the default profile to show the following screen. Figure 26 EP Management > Ether > Config > Filter (profile) 34 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 35
    here. Host Limit Apply Back Type the maximum hosts allowed to connect to the termination adapter. Service is disabled if this is 0. Click Apply to save your settings. Click Back to return to > Config > Port on the termination adapter to show the following screen. EOC350 Series User's Guide 35
  • ZyXEL EOC350-TS | User Guide - Page 36
    > Ether > Config > Port (termination adapter) LABEL DESCRIPTION Port Service This shows the port name for this row. Select On to enable that both ends support. If the peer port does not support auto negotiation or turns off this feature, the EOC350-TA determines the EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 37
    enable IGMP v1/2 fast leave on the termination adapter's interfaces. Click EP Management > Ether > Config > IGMP on the termination adapter to show the following screen. EOC350 Series User's Guide 37
  • ZyXEL EOC350-TS | User Guide - Page 38
    to egress frames. Select Untag to remove the 802.1Q tag from egress frames. Select Bypass to leave the tag of the frame alone. 38 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 39
    screen to see the status of the termination system's interfaces. Click EP Management > Ether > Config > Status on the termination adapter to show the following screen. EOC350 Series User's Guide 39
  • ZyXEL EOC350-TS | User Guide - Page 40
    screens used to start diagnostic tests from a termination adapter. 5.9.1 Noise Follow these steps to measure the noise spectrum at the termination adapter's coax interface. 40 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 41
    5.9.2 Online Diag Follow these steps to measure some signal parameters at the termination adapter's coax interface without shutting down packet forwarding services. 1 On the EP Management screen, click the Test button in the termination adapter region of the screen. EOC350 Series User's Guide 41
  • ZyXEL EOC350-TS | User Guide - Page 42
    . Once your EOC350-TA is configured and functioning properly, it is highly recommended that you back up your configuration file before making configuration changes. The backup configuration file will be useful in case you need to return to your previous settings. 42 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 43
    off the EOC350-TA while configuration file upload is in progress. 5.11 Adding Offline Termination Adapters Follow these steps to provision new termination adapters before they're deployed. 1 Click EP Management > AddEP in the termination adapter region of the screen. EOC350 Series User's Guide 43
  • ZyXEL EOC350-TS | User Guide - Page 44
    the termination adapter. Note Type a note here. Host Limit Apply Back Type the maximum hosts allowed to connect to the termination adapter. Service is disabled if this is 0. Click Apply to save your settings. Click Back to return to the main EP Management screen. 44 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 45
    an existing user. Add Click this to add a new user. Del Click this to delete a user. Click Add or Edit to see the following screen. EOC350 Series User's Guide 45
  • ZyXEL EOC350-TS | User Guide - Page 46
    > Add or Edit LABEL DESCRIPTION Name Type the username of the administrator allowed to configure the EOC350-TS. New Password Type the password to be used with the username. Retype New Password Re-type whether this rule allows the device to respond to pings. 46 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 47
    previous screen. 6.4 The Telnet Setup Screen Use this screen to enable and configure the telnet server. Click Administration > Telnet Setup to show the following screen. EOC350 Series User's Guide 47
  • ZyXEL EOC350-TS | User Guide - Page 48
    Administration > HTTP Setup LABEL DESCRIPTION HTTP Server Select whether the HTTP service is disabled or enabled. HTTP Port Apply Note: If you disable this, then you cannot access the web configurator. Type the HTTP port number. Click Apply to save your settings. 48 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 49
    this screen. Table 39 Administration > SNMP Setup LABEL DESCRIPTION SNMP Select whether the SNMP service is disabled or enabled. SNMP Port Type the SNMP port number. Name Type a descriptive show the following screen. Figure 48 Administration > SNMP Trap Server EOC350 Series User's Guide 49
  • ZyXEL EOC350-TS | User Guide - Page 50
    . Port Apply Back Type the SNMP trap server's port number. Click Apply to save your settings. Click Back to return to the previous screen. 50 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 51
    or fully qualified domain name. Severity Level Apply Select the severity level of logging information sent to the server. Click Apply to save your settings. EOC350 Series User's Guide 51
  • ZyXEL EOC350-TS | User Guide - Page 52
    > View LABEL DESCRIPTION Refresh Click this to get and show the newest system log entries. Clear Log Click this to clear the system log. 52 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 53
    the time difference for the time zone. Update Period Apply Type how often the time is updated via SNTP. Click Apply to save your settings. EOC350 Series User's Guide 53
  • ZyXEL EOC350-TS | User Guide - Page 54
    LABEL DESCRIPTION Current Time This shows the current time stored in this system. Inquire Time Click this to update the system time via SNTP. 54 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 55
    address of frames that are forwarded by the device. Port Apply Select the port that this rule applies to. Click Apply to save your settings. EOC350 Series User's Guide 55
  • ZyXEL EOC350-TS | User Guide - Page 56
    these steps to put new firmware in the upload area and optionally activate it. 1 Click Upload Firmware to begin. Figure 55 Upload Firmware 2 Click Upload. EOC350 Series User's Guide 56
  • ZyXEL EOC350-TS | User Guide - Page 57
    then click start. Figure 58 Upload Firmware (Uploading...) The following screen appears when the upload is complete. Figure 59 Upload Firmware (post processing) 5 Click Continue. EOC350 Series User's Guide 57
  • ZyXEL EOC350-TS | User Guide - Page 58
    new firmware from the upload area to the working area and restart with it. Click Activate Firmware > System Firmware to show the following screen. 58 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 59
    file will be useful in case you need to return to your previous settings. Figure 64 Backup/Restore > Backup Master Click Backup to save the EOC350-TS's current configuration to your computer. EOC350 Series User's Guide 59
  • ZyXEL EOC350-TS | User Guide - Page 60
    previously saved configuration file from your computer to your EOC350-TS. Figure 65 Backup Restore > Restore EOC350-TS The following table describes the items in this screen process. Note: Do not turn off the EOC350-TS while configuration file upload is in progress. 60 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 61
    input any commands for 5 minutes; i.e. the console idle timer is 10 minutes (600 seconds). 11.2.1 Command Format The following table describes some common parameter formats for commands .1.1'. This format is also applicable to and parameters. EOC350 Series User's Guide 61
  • ZyXEL EOC350-TS | User Guide - Page 62
    enable dhcp option 82 and snooping Run a termination adapter connection diagnostics. This stops all service for 10~20 seconds. We recommend running the Online Diag command 'snr' first. to termination system) • -m : termination adapter EoC MAC to be diagnosed 62 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 63
    >: auto-negotiation mode : 10/100Mbps, half/fullduplex mode • -f: current port Ethernet flow-control setting, : turn on /off flow control EOC350 Series User's Guide 63
  • ZyXEL EOC350-TS | User Guide - Page 64
    Mode' to ON or OFF, default OFF • , n is 0~F: 4-digit 'Privacy Key' in hexadecimal, default 0x0 • : termination system note, max 32 chars 64 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 65
    to be removed Display or setup Telnet and Http service parameters. • : configure Telnet or Http • : enable or disable this service • : TCP port number (0~65535) • , default 'public' • : SNMP read-write community name, default 'private' EOC350 Series User's Guide 65
  • ZyXEL EOC350-TS | User Guide - Page 66
    time>] [-z ] [-s -a address] stat [-r] • : activate or deactivate SNTP service for system time • : query SNTP server period, default 60 minutes • : '+hh:mm' built-in IGMP v2 snooping function, default is off 66 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 67
    -t: schedule mode • strict: strict priority • wfq: weighted fair queue Q3/Q2/Q1/Q0 service weight 8/4/2/1 • mix: Q3 is strict, Q2/Q1/Q0 service weight=4/2/1 • -p: select QoS scheme • 0: base on 802.1p (default) • 1: base this MAC entry to the default 00-0000-00-00-00 EOC350 Series User's Guide 67
  • ZyXEL EOC350-TS | User Guide - Page 68
    • -p: login password • -r: 'ro' means a user has read-only privileges, 'rw' means a user has read-write privileges Delete the management user account. • name: user name 68 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 69
    the termination adapter EoC automatically while the termination adapter is online (termination adapter reboot or power cycle). • -p: auto-upgrade termination adapter EoC driver, default 'disable' EOC350 Series User's Guide 69
  • ZyXEL EOC350-TS | User Guide - Page 70
    Chapter 11 Telnet 70 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 71
    Agent in a termination system handles requests from a remote SNMP Manager. The termination system SNMP agent supports standard SNMP community-based operations (SNMP V1/ V2c) as 'SET', 'GET' and 'TRAP'. system is public, and default 'SET' community name is private. EOC350 Series User's Guide 71
  • ZyXEL EOC350-TS | User Guide - Page 72
    Chapter 12 SNMP 72 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 73
    . See Section 1.2.2 on page 11, Section 1.3.2 on page 13 and the Quick Start Guide. 3 Inspect your cables for damage. Contact the vendor to replace any damaged cables. 4 Disconnect and re-connect the power adaptor. 5 If the problem continues, contact the vendor. EOC350 Series User's Guide 73
  • ZyXEL EOC350-TS | User Guide - Page 74
    This means your current settings are lost. See Section 13.4 on page 76 in the Troubleshooting for information on resetting your EOC350-TS. I forgot the username and password. 1 The default username is admin and see or access the Login screen in the Web Configurator. 74 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 75
    and have forgotten it, see the troubleshooting suggestions for I don't know the IP address of my EOC350-TS. 2 Check the hardware EOC350-TS. 5 Reset the device to its factory defaults, and try to access the EOC350-TS with the default IP address. 6 If the problem EOC350 Series User's Guide 75
  • ZyXEL EOC350-TS | User Guide - Page 76
    /password resets to admin/1234. You have to make all of your changes again. You will lose all of your changes when you reset the EOC350-TS to its factory defaults. To reset the EOC350-TS, 1 Make sure the power LED is on. 76 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 77
    , wait for the EOC350-TS to finish restarting, and log in to the Web Configurator. The username is admin and password is 1234. If the EOC350-TS does not restart automatically, disconnect and reconnect the EOC350-TS's power. Then, follow the directions above again. EOC350 Series User's Guide 77
  • ZyXEL EOC350-TS | User Guide - Page 78
    Chapter 13 Troubleshooting 78 EOC350 Series User's Guide
  • ZyXEL EOC350-TS | User Guide - Page 79
    particular use or purpose. ZyXEL shall in no event be held liable for indirect or consequential damages of any kind to the purchaser. To obtain the services of this warranty, contact your 2008, source: http://ec.europa.eu/energy/efficiency/ecodesign/ eco_design_en.htm EOC350 Series User's Guide 79
  • ZyXEL EOC350-TS | User Guide - Page 80
    will step on them or stumble over them. • Always disconnect all cables from this device before servicing or disassembling. • Use ONLY an appropriate power adaptor or cord for your device. • Connect the and electronic equipment should be treated separately. ROHS 80 EOC350 Series User's Guide
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Quick Start Guide
www.zyxel.com
EOC350 Series
Ethernet over Coax Termination System and Terminal Adapter
Version 1.00
Edition 1, 08/2012
Copyright © 2012 ZyXEL Communications Corporation
User’s Guide
Default Login Details
LAN IP Address
192.168.1.1
User Name
admin
Password
1234