ZyXEL ES3500-8PD User Guide - Page 128
MST Instance, 1.5.4, Common and Internal Spanning Tree CIST
View all ZyXEL ES3500-8PD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Chapter 13 Spanning Tree Protocol Devices that belong to the same MST region are configured to have the same MSTP configuration identification settings. These include the following parameters: • Name of the MST region • Revision level as the unique number for the MST region • VLAN-to-MST Instance mapping 13.1.5.3 MST Instance An MST Instance (MSTI) is a spanning tree instance. VLANs can be configured to run on a specific MSTI. Each created MSTI is identified by a unique number (known as an MST ID) known internally to a region. Thus an MSTI does not span across MST regions. The following figure shows an example where there are two MST regions. Regions 1 and 2 have 2 spanning tree instances. Figure 60 MSTIs in Different Regions 13.1.5.4 Common and Internal Spanning Tree (CIST) A CIST represents the connectivity of the entire network and it is equivalent to a spanning tree in an STP/RSTP. The CIST is the default MST instance (MSTID 0). Any VLANs that are not members of an MST instance are members of the CIST. In an MSTP-enabled network, there is only one CIST that runs between MST regions and single spanning tree devices. A network may contain multiple MST regions and other network segments running RSTP. Figure 61 MSTP and Legacy RSTP Network Example 128 ES3500 Series User's Guide