ZyXEL ES3500-8PD User Guide - Page 261
Error-Disable Recovery Configuration
View all ZyXEL ES3500-8PD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 261 highlights
Chapter 32 Error Disable Table 109 Advanced Application > Errdisable > Errdisable Detect (continued) LABEL Mode DESCRIPTION Select the action that the Switch takes when the number of control packets exceed the rate limit on a port, set in the Advanced Application > Errdisable > CPU protection screen. Apply Cancel • inactive-port - The Switch disables the port on which the control packets are received. • inactive-reason - The Switch drops all the specified control packets on the port. • rate-limitation - The Switch drops the additional control packets the port has to handle in every one second. Click Apply to save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Click Cancel to begin configuring this screen afresh. 32.6 Error-Disable Recovery Configuration Use this screen to configure the Switch to automatically undo an action after the error is gone. Click the Click Here link next to Errdisable Recovery in the Advanced Application > Errdisable screen to display the screen as shown. Figure 151 Advanced Application > Errdisable > Errdisable Recovery The following table describes the labels in this screen. Table 110 Advanced Application > Errdisable > Errdisable Recovery LABEL DESCRIPTION Active Select this option to turn on the error-disable recovery function on the Switch. Reason This field displays the supported features that allow the Switch to shut down a port or discard packets on a port according to the feature requirements and what action you configure. * Use this row to make the setting the same for all entries. Use this row first and then make adjustments to each entry if necessary. Timer Status Note: Changes in this row are copied to all the entries as soon as you make them. Select this option to allow the Switch to wait for the specified time interval to activate a port or allow specific packets on a port, after the error was gone. Deselect this option to turn off this rule. ES3500 Series User's Guide 261