ZyXEL NBG334S User Guide - Page 205
I cannot Telnet to the NBG334W.
View all ZyXEL NBG334S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Chapter 23 Troubleshooting 2 Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick Start Guide. 3 Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java enabled. See Appendix B on page 217. 4 Make sure your computer is in the same subnet as the NBG334W. (If you know that there are routers between your computer and the NBG334W, skip this step.) • If there is a DHCP server on your network, make sure your computer is using a dynamic IP address. See Section 7.3 on page 102. • If there is no DHCP server on your network, make sure your computer's IP address is in the same subnet as the NBG334W. See Section 7.3 on page 102. 5 Reset the device to its factory defaults, and try to access the NBG334W with the default IP address. See Section 7.3 on page 102. 6 If the problem continues, contact the network administrator or vendor, or try one of the advanced suggestions. Advanced Suggestions • Try to access the NBG334W using another service, such as Telnet. If you can access the NBG334W, check the remote management settings and firewall rules to find out why the NBG334W does not respond to HTTP. • If your computer is connected to the WAN port or is connected wirelessly, use a computer that is connected to a LAN/ETHERNET port. V I can see the Login screen, but I cannot log in to the NBG334W. 1 Make sure you have entered the password correctly. The default password is 1234. This field is case-sensitive, so make sure [Caps Lock] is not on. 2 You cannot log in to the web configurator while someone is using Telnet to access the NBG334W. Log out of the NBG334W in the other session, or ask the person who is logged in to log out. 3 Disconnect and re-connect the power adaptor or cord to the NBG334W. 4 If this does not work, you have to reset the device to its factory defaults. See Section 23.4 on page 207. V I cannot Telnet to the NBG334W. See the troubleshooting suggestions for I cannot see or access the Login screen in the web configurator. Ignore the suggestions about your browser. V I cannot use FTP to upload / download the configuration file. / I cannot use FTP to upload new firmware. NBG334W User's Guide 205